RoHS, FCC, CE, IC, RCM

• Models include the CVT10-S (single-mode) and the CVT10-M (multi-mode).
• 2x optical ports with hot-swappable optical modules installed at the factory, bandwidth of each up to 10 Gbit/s
• 10x Gigabit Ethernet ports, bandwidth of each up to 1 Gbit/s

      − Fiber in and Ethernet out           If the input device has 8 or 16 Ethernet ports, the first 8 Ethernet ports of the CVT10 are available.           If the input device has 10 or 20 Ethernet ports, all the 10 Ethernet ports of the CVT10 are available. If Ethernet ports 9 and 10 are found unavailable, they will be available after upgrading in the future.       − Ethernet in and fiber out           All the 10 Ethernet ports of the CVT10 are available.

• 1x type-B USB control port

Electrical Specifications	Power supply	100-240V~, 50/60Hz, 0.6A
	Rated power consumption	22 W
Operating Environment	Temperature	–20°C to +55°C
	Humidity	10% RH to 80% RH, non-condensing
Storage Environment	Temperature	–20°C to +70°C
	Humidity	10% RH to 95% RH, non-condensing
Physical      Specifications	Dimensions	254.3 mm × 50.6 mm × 290.0 mm
	Net weight	2.1 kg Note: It is the weight of a single product only.
	Gross weight	3.1 kg Note: It is the total weight of the product, accessories and packing materials packed according to the packing specifications
PackingInformation	Outer box	387.0 mm × 173.0 mm × 359.0 mm, kraft paper box
	Packing box	362.0 mm × 141.0 mm × 331.0 mm, kraft paper box
	Accessories	1x Power cord, 1x USB cable  1x Supporting bracket A (with nuts), 1x Supporting bracket B (without nuts) 1x Connecting piece 12x M3*8 screws 1x Assembling diagram 1x Certificate of Approval

Name	Description
100-240V~,     50/60Hz, 0.6A	Power input connector  ON: Turn on the power.  OFF: Turn off the power. For the PowerCON connector, users are not allowed to plug in hot. Pour le connecteur PowerCON, les utilisateurs ne sont pas autorisés à se connecter à chaud.
OPT1/OPT2	10G optical ports
	CVT10-S optical module description:  Hot swappable  Transmission rate: 9.95 Gbit/s to 11.3 Gbit/s   Wavelength: 1310 nm Transmission distance: 10 km	CVT10-S optical fiber selection:  Model: OS1/OS2  Transmission mode: Single-mode twin-core Cable diameter: 9/125 μm Connector type: LC Insertion loss: ≤ 0.3 dB Return loss: ≥ 45 dB
	CVT10-M optical module description:  Hot swappable  Transmission rate: 9.95 Gbit/s to 11.3 Gbit/s   Wavelength: 850 nm Transmission distance: 300 m	CVT10-M optical fiber selection:  Model: OM3/OM4  Transmission mode: Multi-mode twin-core Cable diameter: 50/125 μm Connector type: LC Insertion loss: ≤ 0.2 dB Return loss: ≥ 45 dB
1– 10	Gigabit Ethernet ports

Caution: The equipment must be installed in a restricted access location. Attention: L'équipement doit être installé dans un endroit à accès restreint. When the product needs to be installed on the rack, 4 screws at least M5*12 should be used to fix it. The rack for installation shall bear at least 9kg weight.

Name	Description
USB	Type-B USB control port Connect to the control computer (NovaLCT V5.4.0 or later) for upgrading the CVT10 program, not for cascading.
PWR	Power indicator Always on: The power supply is normal.
STAT	Running indicator Flashing: The device is functioning normally.
OPT1/OPT2	Optical port indicators Always on: The optical fiber connection is normal.
1– 10	Ethernet port indicators Always on: The Ethernet cable connection is normal.

MODE	The button to switch the device working mode The default mode is CVT mode. Only this mode is currently supported.
CVT/DIS	Working mode indicatorsAlways on: The corresponding mode is selected. CVT: The fiber converter mode. OPT1 is the master port and OPT2 is the backup port.   DIS: Reserved

The CVT10 is used for long-distance data transmission. Users can decide a connection method based on whether the sending card has optical ports. The Sending Card Has Optical PortsThe Sending Card Has No Optical PortsA single CVT10 device is half-1U in width. Two CVT10 devices, or one CVT10 device and a connecting piece can be combined into one assembly that is 1U in width. Assembly of Two CVT10Assembly of a CVT10 and a Connecting PieceThe connecting piece can be assembled to the right or left side of the CVT10.The amount of power consumption may vary depending on factors such as product settings, usage, and environment.

• Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.
• Reduced Air Flow – Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.
• Mechanical Loading – Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.
• Circuit Overloading – Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
• Reliable Earthing – Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).